INTRODUCTION
- Statistical thermodynamics studies the derivation of macroscopic quantities and relationship from molecular models
- Analysis level:
- macroscopic level: it refers to finite volumes (1 million)
- microscopic level: to infinitesimal volumes
- molecular/atomic level: to the size of one molecule, of the order of 10-10
- Fundamental idea of ST approach
In nature there are fluctuations, which are not present in macroscopic systems where we find average values of properties (constant)
The molecular fluctuations are possible to be seen in microscopic level
The idea is building a model for molecular level, from which obtaining useful relationships to define the properties of macroscopic level
From microscopic level we reach the macroscopic level by statistical averaging (integrals)
Example of molecular fluctuations: 1 mole of mono-atomic ideal gas in vessel
Classical mechanics -> each atoms moves on linear trajectory until it collides with other molecules
An instantaneous picture represents one microstate
State means position and velocity of each atom (they change continuously)
Degrees of freedom for each atoms: 6 in 3-D ; 1 mole -> 6,1023 molecules -> 6,1023 6 DoF
The state of the system is fully described when for all the particles the velocity and the position are known + microstate described
We can't characterize exactly the state of such system, in fact in order to do that we need initial conditions and the solution of Newton's law for a number of particles of the Nth order. That is not a problem because we cannot reach microscopic level using small parameters as t, T, p, so this path is not really possible
We have to get relationships to obtain that parameters without following the particles trajectory
Many microstates to 1 macrostates
Fluctuating values, many parameters
1 microstate
Few parameters, average values
With statistical averaging (integrals)
- Thermodynamics can be applied to all kind of objects
- The number of objects/particles must be large
- It applies to equilibrium conditions:
- when macroscopic quantities don't change in time
- in absence of spatial gradients
ENERGY
Intensive Energy contributions:
capital: E = K + Eint + U
extensive quantities
K = translational energy
contribution due to kinetic energy
Eint = Rotational and vibrational (interatomic) contributions
polyatomic species only
= 0 for monatomic species
the mass centre of the molecular is different from the mass centre of the atoms - consequent of the atom center to the molecular centre and respect to the other atoms
for monatomic species there is one mass centre: only one atom
U = Potential energy -> a) interaction between particles
= 0 for mono atomic species and for ideal gas conditions (particles are too far away - 100 A)
T and P -> relate gas condition to well; e.g., the system has to be diluted enough
b) external force field
SI can be developed both for quantum mechanics and for classical mechanics
Difference
energy assume discrete values
It assumes continuous values -> bc velocity is a continuous value
We want to understand the physical origin of energy levels (discrete values) and their properties and introduce a quantum mechanical model for ideal gas -> thanks to it we can derive some fundamental equations of thermodynamics
FREE PARTICLE IN A BOX PROBLEM
Schrodinger equation for one particle
- h/2pi i * ∂ψ/∂t = - h2/8 pi2m (∂2ψ/∂x2 + ∂2ψ/∂y2 + ∂2ψ/∂z2) + Uψ
unknown variable to calculate
Derivative respect to time
Derivative respect to space
h = Plank constant
6.62 . 10-34 m2 kg / s = J . s = m(kg . m2/s)
mass . velocity = linear momentum
dimensions of Angular momentum
i = imaginary unit: √-1
m = particle mass
U = potential energy of the particle
ψ(x,y,z,t) = Wave function, complex quantity
Schrodinger equation is used to calculate the electron distribution around an Atom nucleus (= orbitals) - region where is significant the probability of finding an electron
Electron orbitals are distinguished depending on quantum numbers
n principal quantum number = electron energy {size, 1n + size , energy} l azimuthal quantum number = angular momentum around nucleus (shape) m magnetic quantum number = magnetic moment (orientation) s spin quantum number = electron intrinsic spin
Electron distribution in the volume around the orbitals -> the particle is the electron
Molecule distribution inside a given volume => the particle is a molecule/atom (Box)
psi = provides the probability of finding a particle in a given volume of space, namely the probability of finding a particle in an infinitesimal volume dx dy dz is given by: |psi|2 dx dy dz
In Quantum mechanics, if the wave function is known, then the state of system is determined
In the Box we consider one mono-atomic particle -> it is a dilute system where the particle does not interact with other particles, so, from point of view an ideal gas system particle -> = free
Assumptions => Eint=0 , U=0 so E = U + K
One-dimensional (1-D) geometry so spatial gradients are only in the x direction
No external force field acting on the particles inside the volume, but there is a force field acting on the boundaries
-h/(2pi i) d psi(x,t)/dt = -h2/(8pi2m) d2psi(x,t)/dx2 + u(x,t) psi(x,t)
the pot. en u usually is only a function of space coordinates not time
Demonstrating that, then psi can be decomposed into 2 functions: psi(x,t) = psi(x)psi(t)
Stationary time-independent wave function
-h2/(8pi2m) (d2psi/dx2) + u(x)psi = Epsi
for one molecule/atom
h2/(8pi2m) (d2psi/dx2) + u(x)psi = Epsi
E = Total Energy = U(x), constant
u = potential energy = 0
The problem is analysed using the time-independent Schrodinger equation
The particle is not able to go outside the box
u = 0 for 0 < x < a
u = in for x < 0 and x > a
psi(0) = psi(a) = 0 } Boundary conditions = With the external force field there isnt the possibility of finding the particle outside
Time-independent 1D Sch. equation => d2psi/dx2 = - 8pi2m/h2 e psi
The solution is => psi(x) = (2/a)1/2 sin(npi x/a) n = 1, 2, 3
can assume infinite int.values
The equation has meaningful solution only if there is a parameter n that assumes integer values
The energy corresponding to the solution is E = n2h2/8ma2
So, due to the fact that the equation has meaningful solution only if there is a parameter n that assumes integer values, in our energy has discrete value, therefore we energy is quantied (doesn't have a continuous spectrum)
Our physical problem is: predict the distribution of particle inside the box (ex. one particle of He). There are rany electrons, so our system fluctuates between number of microstates
from QP we have many microstates bc of different wave functions
From CL we have different trajectories bc the particle has different velocity and position
About the state of the system, there is the thermodynamic state determined by ex. T and P; then there are microstates each of them is characterized by different wave function and therefore different energy level
The lowest possible energy value occur for n = 1, namely at ground state; differently than at n = 0 so energy is zero (E = 0)
Attenzione |psi|2 gives us the probability (not psi) that the specific microstate has to occur
Plot of |psi|2 vs x/a at n = 1
|psi|2[1/m]
n = 1
At different position we have different probability (= 0 close to the walls, max at the center)
But we are expecting that the probability is the same every where (cfr)
Increasing the n value (so energy) the classical limit is approached, so we reach high E value respect to the ground state
Space variables in dimensionless form
2-D box -> Rectangle
psi(x,y) = (4/ab)1/2 sin(nxpi x/a) sin(nypi y/b)
E = h2/8m (nx2/a2 + ny2/b2)
Square
E = h2/8m (nx2/a2 + ny2/b2) = h2/8ma2 (nx2 + ny2)
If nx = 1ny = 2
E = h2 / 8ma2 S
ux = 2ny = 1
E = h2 / 8ma2 S
Two different microstates (BC they have different energy levels)has the same value of energy, that is degeneracy.This phenomena occurs also in 3-D (not 1-D)
-> Bivvulvocal correspondencebetween q. number andenergy level
3-D -> Rectangular cuboid
ψ(x,y,z) = (8/abc)1/2 sin(uxπx/a) sin(nyπy/b) sin(nzπz/c)
E = h2 / 8m (nx2/a2 + ny2/b2 + nz2/c2)
Cube
E = h2 / 8m (nx2 + ny2 + nz2) / v2/3
V = a3
The number of quantum numbers, that I need to determine the microstate, increases with the dimension of the system
Number n -> wave function -> microstate
If quantum numbers are specified, then the wave function and the state (microstate) of the system are determined, as well as its energy level
Unexpected remarks: Energy depends on he volume (if we don't know it, then we can't calculate E)and not on T
Therefore, if work is exchanged, then the E changes (BC there is variation of volume)and if heat is varied (V const), the energy doesn't change
STATISTICAL DESCRIPTION OF SYSTEMS OF PARTICLES
Let's consider an ensemble of many particles. The microstate can be calculated knowing the velocity and the position of each particles, but we want to know how determine probabilities and averages of microstates using a statistical approach
Empirical determination of probabilities
a) Ensemble averages -> It might be difficult to estimate them practically
Prepare in the same way a very high number of similar systems with same amount of gas. We compute the probability of the specific event as the occurrence of obtaining that event divided by the occurrence of all events (each particle in any velocity range and any position)
b) Time averages -> may be experimentally estimated
We use the same gas in the same vessel at different times and check the occurrence of such specific event/microstate through successive measurements in time
Under specific assumptions a=b: ERGODIC SYSTEM